1 publication order number : mch5541/d ? semiconductor components industries, llc, 2014 august 2014 - rev. 0 www.onsemi.com mch5541 overview mch5541 is ( ? )30v, ( ? )700ma, v ce (sat) ; ( ? 220)190mv (max), pnp/npn 2 in 1 type mcph5, bipolar transistor. features ? composite type with a pnp / npn transistor contained in one package, facilitating high-density mounting ? ultrasmall package permitting applied sets to be small and slim. package : sc-88afl / mcph5 (2.0 ? 1.6 ? 0.85 mm) typical applications ? mosfet gate drivers ? lamp drivers ? relay drivers ? motor drivers specifications ( ) : pnp absolute maximum ratings at ta = 25 ? c (note 1) parameter symbol conditions ratings unit collector-to-base voltage v cbo ( ? 30) 40 v collector-to-emitter voltage v ceo ( ? 30) 30 v emitter-to base voltage v ebo ( ? ) 5 v collector current i c ( ? ) 700 ma collector current (pulse) i cp pw ?? 10 ? s ( ? ) 3 a collector dissipation p c mounted on a ceramic board (600mm 2 x 0.8m) 0.5 w junction temperature tj 150 ? c storage temperature tstg ? 55 to +150 ? c note 1 : stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceede d, device functionality should not be assumed, damag e may occur and reliability may be affected. electrical characteristics at ta = 25 ? c (note 2) parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =( ? )30v, i e =0 ( ? ) 100 na emitter cutoff current i ebo v eb =( ? )4v, i c =0 ( ? ) 100 na dc current gain h fe v ce =( ? )2v, i c =( ? 10)50ma (200) 300 (500) 800 gain-bandwidth product f t v ce =( ? )2v, i c =( ? )50ma (520) 540 mhz output capacitance cob v cb =( ? )10v, f=1mhz (4.7) 3.3 pf collector-to-emitter saturation voltage v ce (sat) i c =( ? )200ma, i b =( ? )10ma ( ? 110) 85 ( ? 220) 190 mv base-to-emitter saturation voltage v be (sat) i c =( ? )200ma, i b =( ? )10ma ( ? ) 0.9 ( ? ) 1.2 v collector-to-base breakdown voltage v (br) cbo i c =( ? )10 ? a, i e =0 ( ? 30) 40 v collector-to-emitter breakdown voltage v (br) ceo i c =( ? )1ma, r be = ? ( ? ) 30 v emitter-to-base breakdown voltage v (br) ebo i e =( ? )10 ? a, i c =0 ( ? ) 5 v continued on next page. pnp/npn bipolar transistor ( ? )30v, ( ? )700ma, v ce (sat) ; ( ? 220)190mv (max) electrical connection 5 2 4 13 top view 1 : base1 2 : emitter common 3 : base2 4 : collector2 5 : collector1 ordering information see detailed ordering and shipping information on page 6 of this data sheet.
mch5541 www.onsemi.com 2 continued from preceding page. parameter symbol conditions ratings unit min typ max turn-on time ton see specified test circuit. 35 ns storage time tstg see specified test circuit. (125) 255 ns fall time t f see specified test circuit. (25) 40 ns note 2 : product parametric performance is indicated in the electrical characterist ics for the listed test conditions, unless o therwise noted. product performance may not be indicated by the elec trical characteristics if oper ated under different conditions. switching time test circuit v r r b v cc =12v v be = --5v + + 50 input output r l 220 f 470 f pw=20 s i b1 d.c. 1% i b2 20i b1 = --20i b2 =i c =300ma for pnp, minus sign is omitted. [pnp] [npn] 0 0 --200 --100 i c -- v ce it05049 --400 --300 --600 --500 --700 --200 --600 --400 --800 --1000 --100 --500 --300 --700 --900 i b =0 --500 a --1ma -- 2ma -- 5ma -- 3ma -- 7ma --10ma --15ma --40ma --50ma -- 30ma --20ma --25ma collector-to-emitter voltage, v ce -- mv collector current, i c -- ma 0 0 500 400 300 700 600 200 200 100 500 1000 800 900 100 300 400 600 700 i c -- v ce it05082 i b =0 200 a 400 a 1ma 2ma 3ma 5ma 7ma 10ma 50ma 15ma 30ma 20ma collector-to-emitter voltage, v ce -- mv collector current, i c -- ma
mch5541 www.onsemi.com 3 [pnp] [npn] [pnp] [npn] [pnp] [npn] it05051 3 100 h fe -- i c --1.0 2 3 5 7 --10 2 3 5 7 2 3 5 7 --100 --1000 2 3 5 1000 7 5 7 v ce = --2v ta=75 c 25 c --25 c it05054 --1.0 v ce (sat) -- i c 23 57 --10 23 57 23 57 --100 --1000 --1000 --100 2 3 5 7 2 3 5 7 --10 ta=75 c --25 c 25 c i c / i b =20 collector current, i c -- ma dc current gain, h fe collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv it05055 v ce (sat) -- i c --1.0 23 57 --10 23 57 23 57 --100 --1000 --10 3 --1000 2 2 3 5 7 2 3 5 7 --100 ta=75 c --25 c 25 c i c / i b =50 collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv v ce (sat) -- i c it05086 10 100 1000 7 5 3 2 7 5 3 2 1.0 23 5 10 100 1000 7 23 5 7 23 5 7 i c / i b =50 75 c --25 c ta= 25 c collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- ma 1.0 10 100 1000 3 2 57 3 2 57 3 2 57 1000 100 2 3 5 7 h fe -- i c it05084 v ce (sat) -- i c it05085 ta=75 c -- 25 c 25 c v ce =2v 2 3 5 7 2 3 5 7 10 1.0 100 2 3 5 7 1000 1.0 23 5 10 100 1000 7 2357 2357 75 c --25 c ta= 25 c i c / i b =20 collector current, i c -- ma dc current gain, h fe collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv [pnp] [npn] it05050 0 0 i c -- v be --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --200 --800 --500 --700 --400 --300 --600 --100 ta=75 c 25 c --25 c v ce = --2v base-to-emitter voltage, v be -- v collector current, i c -- ma 0 300 400 200 800 700 600 500 100 0 0.2 0.4 0.6 0.8 1.0 i c -- v be it05083 ta=75 c --25 c 25 c v ce =2v base-to-emitter voltage, v be -- v collector current, i c -- ma
mch5541 www.onsemi.com 4 [pnp] [npn] [pnp] [npn] [pnp] [npn] it05053 --1.0 0.1 cob -- v cb --10 2 3 5 7 2 3 5 2 3 5 7 10 f=1mhz it05052 --1.0 f t -- i c 23 57 23 57 23 57 --10 --100 --1000 100 1000 5 7 2 3 v ce = --10v collector current, i c -- ma gain-bandwidth product, f t -- mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf f=1mhz --0.1 0.1 base current, i b -- ma ron -- i b on resistance, ron -- it06403 7 5 3 2 10 7 5 3 2 7 5 3 2 1.0 100 3 2 57 3 2 57 --1.0 --10 out in 1k 1k i b it05089 f t -- i c 100 1000 7 3 5 2 10 1.0 100 23 57 23 57 1000 23 57 v ce =10v cob -- v cb it05088 2 10 1.0 7 3 5 1.0 10 23 5 23 5 7 f=1mhz collector current, i c -- ma output capacitance, cob -- pf collector-to-base voltage, v cb -- v gain-bandwidth product, f t -- mhz base current, i b -- ma ron -- i b on resistance, ron -- f=1mhz 0.1 0.1 it06793 10 7 5 3 2 7 5 3 2 1.0 3 2 57 3 2 57 1.0 10 out in 1k 1k i b [pnp] [npn] 2 5 7 --1.0 23 57 --10 23 57 23 57 --100 --1000 it05056 v be (sat) -- i c 3 --1.0 2 5 7 3 --10 --0.1 ta= -- 2 5 c 75 c 25 c i c / i b =20 collector current, i c -- ma base-to-emitter saturation voltage, v be (sat) -- v v be (sat) -- i c it05087 1.0 0.1 10 3 2 5 7 3 2 5 7 1.0 23 5 10 100 1000 7 23 5 7 23 5 7 i c / i b =20 75 c ta= --25 c 25 c collector current, i c -- ma base-to-emitter saturation voltage, v be (sat) -- v
mch5541 www.onsemi.com 5 package dimensions unit : mm 1 : base 1 2 : emitter common 3 : base 2 4 : collector 2 5 : collector 1 0 0 it08991 100 200 300 400 500 600 40 20 100 120 60 80 140 160 mounted on a ceramic board (600mm 2 ? 0.8mm) it08990 2 3 5 7 2 5 0.1 2 3 3 5 7 2 1.0 0.01 23 57 0.1 1.0 23 57 10 23 5 100ms dc operation 100 s 500 s 10ms 1ms ambient temperature, ta -- c p c -- ta collector dissipation, p c -- mw collector-to-emitter voltage, v ce -- v a s o collector current, i c -- a ta=25 c single pulse mounted on a ceramic board (600mm 2 ? 0.8mm) for pnp, minus sign is omitted [pnp / npn] i cp =3a i c =0.7a sc-88afl / mcph5 case 419ap issue o to
mch5541 www.onsemi.com 6 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc) or its subsidiaries in the united st ates and/or other countries. scillc owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a lis ting of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf . scillc reserves the right to make changes with out further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any parti cular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specific ations can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated fo r each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc pro ducts are not designed, intended, or authorized for use as com ponents in systems int ended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees ar ising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that sci llc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject t oall applicable copyright laws and is not for resale in any manner. ordering information device marking package shipping (qty / packing) MCH5541-TL-E e1 sc-88afl / mcph5 (pb-free) 3000 / tape & reel ? for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d. http://www.ons emi.com/pub_link/collateral/brd8011-d.pdf
|
